SoloGood F722 Flight Controller Stack 30×30 Drone FC Stack with 4in1 60A ESC for FPV Racing Drone X8 Drone (FC ESC Stack)

Important management: STM32F722RET6

Gyroscope: ICM42688P

Barometer: Assist (DPS310)

OSD: Assist (AT7456E)

BEC: 10V/2A, 5V/2A

UART port: 6

Black field: onboard (16M flash reminiscence)

Variety of supported motors: M1-M8

Firmware title: BETAFLIGHT: SOLOGOODF722

Enter voltage: 3-6S lithium battery (11-30V MAX)

Output voltage: VBAT

Set up gap: 30.5×30.5mm (4mm aperture)

Flight management measurement: 38.5×38.5mm

Weight: 8.1 grams

LED standing: blue: gyroscope standing, inexperienced: 3V3 indication, purple: 5Vbec indication, white: 10Vbec indication

DJI/Vista: Assist/6pin

Electrical regulation

TVS protecting diode: Sure

Exterior capacitor: 1000uF high-frequency low resistance capacitor (included within the packaging)

ESC/Motor Protocol: DSHOT300/600

Steady present: 60A

Most present :65A

Set up gap: 30.5×30.5mm (4mm aperture)

For more information about FC, pls scan this app

Sologood BLHELI-8 60A 4in1 electrical regulation.

Firmware: BLHELI-S: J-H-30-16.7

Steady present :60A

Most present :65A

Electrical dispatch protocol assist: DSHOT300/600

Enter voltage: 3-6s

Galvanometer: Sure

TVS diode safety: Sure

Exterior capacitor: 1000UF high-frequency electrolytic capacitor

MOS: Excessive efficiency Toshiba MOS

Set up gap place 30.5×30.5mm (4mm gap)

Dimension: 41.5mm X42mm

Weight: 15g

SoloGood 60A 4in1 ESC FC: Made in Japan with MOS transistors, high-performance processors, and TVS safety tubes, making certain glorious efficiency even in complicated flight environments
Massive solder pads for simple soldering: The pads are distant from the parts to make sure excellent soldering for novices.
Helps as much as 8 motor outputs: effortlessly construct your X8 FPV drone.
LED standing indicator lights: 4 LED standing lights show the working standing underneath completely different states.