Alaohu Flysky FS-i6 6CH RC Transmitter and Receiver FS-iA6B 2.4GHz AFHDS 2A Radio Control System Remote Controller for RC FPV Multirotor Fixed Wing Boat Hobby

The FLYSKY FS-i6 Transmitter 2.4G AFHDS 2A has steady sign, lengthy distant management distance and a number of features, which is widespread with customers. It’s suitable with AFHDS 2A collection receivers.

The transmitter and receiver had been pre-bound earlier than supply. If you’re utilizing a unique transmitter or receiver, comply with the steps beneath to hook up with the receiver’s B/VCC port.
1, Join the included binding cable to the receiver’s B/VCC port.
2, Plug the DC 4V-6.5V energy provide into different ports, the constructive and destructive poles can’t be wrongly linked.
3, Maintain urgent the “BIND KEY”, after which activate the transmitter to enter the binding mode.
4, The transmitter will show the RX voltage, which means the binding is profitable.
5, Take away binding wire, Examine the operation of the servos. If one thing would not work as anticipated, begin this course of from the start.

FS-i6 Specs:
*Pushing the left throttle stick up and down doesn’t mechanically return to middle
Channels: 6 CH
Mannequin Sort: Multirotor/Mounted Wing/Heli
[Parameters can be set to support quadcopters, although there is no quadcopter icon in the TX menu.]
RF Vary: 2.40-2.48GHz
Mark width: 500KHz
RF Energy: Lower than 20dBm
2.4GHz system: AFHDS 2A and AFHDS
Code kind: GFSK
Sensitivity: 1024
Low voltage warning: lower than 4.2V
DSC connector: PS2; Output: PPM
Charging Port: No
Transmitter weight: 392g 13.83 oz
Transmitter dimension: 174x89x190mm 6.85*3.5*7.48 inch
Packing dimension: 212*106*235mm 8.35*4.17*9.25 inch
Bundle Weight: 676g 1.49 kilos
Energy: 6V, 4 x AA battery (not included)
Show mode: STN transflective constructive kind, 128 x 64 dot matrix VA73 x 39mm, white backlight.
Certification: CE, FCC
Mannequin Recollections: 20
Management vary: 500m【It will depend on the utilization surroundings, climate and different elements】
FS-iA6B Specs:
Channels: 6CH
RF vary: 2.408 – 2.475 GHz
Band:135
RF Energy: ≤20dBm
RX Sensitivity: -105dBm
2.4G system: AFHDS 2A
Code kind: GFSK
ANT size: 26mm * 2 (twin antenna)
Enter energy: 4.0-6.5V DC
Dimension: 43x26x15mm 1.69*1.02*0.59 inch
Weight: 16g 0.56 oz
i-bus interface: Sure Mannequin Sort: Muotor/Mounted Wing/
Suitable Transmitters: Compat with FS-i6, FS-I6X, FS-IFS-i4
Bundle Contents：
FS-i6 Transmitter * 1
FS-iA6B receiver * 1
Binding Cable * 1
Handbook【EN & CN】 * 1
Supply with out batteries

Help PWM/PPM/i.bus,
Find out how to activate PPM:
Press and maintain the “OK” button on the proper aspect of the display screen for two seconds to enter the distant management menu-System-RX Setup-PPM Ostput setting to show it on or off.
Press and maintain the “CANCEL” key on the proper aspect of the display screen for two seconds to avoid wasting.
Then the place of FS-IA6B receiver CH1 outputs PPM.

The FLYSKY 2.4G AFHDS 2A has steady sign, lengthy distant management distance and a number of features, which is widespread with customers. It’s suitable with AFHDS 2A collection receivers.
Output PWM/PPM/i-Bus, which might be chosen via TX Menu – System – RX Setup Settings
Relevant to RC multi rotor FPV Drone Mounted wing Helicopter Boat Automotive DIY Passion
FLYSKY FS-i6 transmitter can retailer 20 units of mannequin setting parameters
RC transmitter and receiver with glorious price efficiency