BETAFPV F4 1S 5A AIO Brushless Flight Controller with Built-in SPI Frsky Receiver, 8MB BlackBox, BT2.0 Cable Connector for 65/75mm 1S Micro FPV Whoop Drones
$43.99
【CC2500 Chips】BETAFPV F4 1S 5A flight controller comes with the built-in SPI Frsky receiver(CC2500 chip), which is compatible with Futaba S-FHSS, Frsky D8, and D16 protocol. Also, it reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers.
【Gyro&ESC Hardware】We updated the FC with high-quality BMI270 gyro and BB51 ESC hardware. If you want to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
【8MB BlackBox】Built-in an 8MB flash memory chip dedicated to Blackbox logging. It’s an extremely powerful tool for tuning and troubleshooting an FPV drone.
Discover:
The BLHeli_S firmware might assist the BB51 {hardware} now. This board is powered by BB51 {hardware}.
If you wish to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
BetaFlight Configurator, BLHeli Configurator, and Bluejay Configurator are invalid for the BB51 ESC now.
SPI Frsky model doesn’t assist motor course set via Betaflight Configurator.
The default protocol is configured to Frsky D16 FCC out of the manufacturing facility. Pilots might arrange the protocol in accordance with your personal want in Betaflight Configurator.
DO NOT flash the opposite firmware, in any other case, the RX might be misplaced in management at a really shut vary.
We have now already constructed our personal firmware betaflight_4.2.11_BETAFPVF411RX for SPI Frsky RX model to assist BMI270 gyro.
Specification of FC
CPU: STM32F411CEU6 (100MHZ)
Six-Axis: BMI270
Constructed-in Receiver: SPI CC2500 (Frsky)
Receiver antenna: Line antenna
FC Dimension: 30*30mm
Mounting Gap Dimension: 26*26mm
Firmware model: betaflight_4.2.11_BETAFPVF411RX
OSD: Constructed-in BetaFlight OSD
Blackbox: 8MB
Advocate VTX: >=200mW, like BETAFPV M03 VTX or TBS Unify VTX
Energy Cable: 55mm, with BT2.0 connector
Weight: 3.7g, with out energy cable and BT2.0 connector
Specification of ESC
Energy provide: 1S
Present: 5A steady and peak 6A (3 seconds)
ESC firmware: A_X_5_.HEX for BB51 BLHeli_S {hardware}
Sign Help: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Bundle
1 * F4 1S 5A AIO Brushless Flight Controller-Frsky
4 * M1.2x4mm Screws
4 * M1.4x5mm Screws
4 * Anti-vibration Rubber Dampers
【CC2500 Chips】BETAFPV F4 1S 5A flight controller comes with the built-in SPI Frsky receiver(CC2500 chip), which is appropriate with Futaba S-FHSS, Frsky D8, and D16 protocol. Additionally, it reserves an SBUS port and a UART port, which is offered for the SBUS protocol receiver or different exterior receivers.
【Gyro&ESC {Hardware}】We up to date the FC with high-quality BMI270 gyro and BB51 ESC {hardware}. If you wish to setup the ESC specification, please use the BLHeliSuite16714902A_Beta or ESC-Configurator.
【8MB BlackBox】Constructed-in an 8MB flash reminiscence chip devoted to Blackbox logging. It’s an especially highly effective software for tuning and troubleshooting an FPV drone.
【Cross Form】F4 1S 5A AIO FC adopts the traditional cross form design with solely 3.6g ultralight weight, affordable structure, and straightforward to construct. With a 26*26mm mounting gap dimension, it’s totally appropriate with the whoop body within the present market. Particularly appropriate for the burden delicate 65/75mm wheelbase micro whoop drones.
【Technical Help & Guarantee】BETAFPV has knowledgeable group and thoughtful after-sales service. You probably have any points with its technical or high quality, BETAFPV ensures to serve you!
Specification: BETAFPV F4 1S 5A AIO Brushless Flight Controller with Built-in SPI Frsky Receiver, 8MB BlackBox, BT2.0 Cable Connector for 65/75mm 1S Micro FPV Whoop Drones
|
User Reviews
Be the first to review “BETAFPV F4 1S 5A AIO Brushless Flight Controller with Built-in SPI Frsky Receiver, 8MB BlackBox, BT2.0 Cable Connector for 65/75mm 1S Micro FPV Whoop Drones”
$43.99
There are no reviews yet.